AM

Adamu M. A

Department of Mechanical Engineering, Ahmadu Bello University, Zaria.

3 Publications
421 Views
257 Downloads
0 Citations
2,589 Global Citations

Publications 3

1
Research Article Vol. 15, Issue 1

Fabrication and Characterisation of Aluminium Alloy/Rice Husk Ash Composites for Lightweight Automobile Wheels

This study focuses on the development of an aluminium alloy composite reinforced with rice husk ash (RHA) for automobile wheel applications. Aluminium piston scrap was used as the base matrix, and RHA was introduced at 5%, 10%, and 15% weight fractions using the stir-casting method. The produced composites were subjected to hardness, tensile streng...

2
Research Article Vol. 15, Issue 1

Evaluation of the Effect of Starch as Binder in Sand Casting of Aluminium

This study focuses on evaluating the effectiveness of cassava starch as an organic binder in sand preparation for aluminium casting, emphasising its influence on key mould properties, moisture content and green compressive strength and overall casting quality. Silica sand mixtures were prepared with cassava starch at 7.5%, 10%, and 12.5% by weight,...

3
Research Article Vol. 11, Issue 2

Investigation into the Bating Potential of Musa Accuminata (Banana) Peel in the Production of Leather

Increasing environmental pressures are forcing tanneries to reduce the level of nitrogenous compounds in generated effluents, due to strict regulations on effluent quality from various unit processes which bating plays a vital role. Bating imparts smoothness and stretchy effect to the resultant leather with the addition of proteolytic enzymes which...

Back to Articles